Fe-doped YMnO3 properties


  • Scientists have used the Modified Becke–Johnson potential to calculate spin-polarized electronic and magnetic properties. It is an improved correction method in Density Function Theory that gives more accurate band gap and electronic structure.


  • ε (ω) = ε1 ω + iε2 ω

  • The frequency-dependent dielectric function of a material has a major impact on its applications. Here, the dispersion, or how the speed of light changes in a material, was described by using real part ε1 (ω) , and optical absorption was described by using the imaginary part ε2( ω)


  • the doped system Fe in YMnO3 has an overall smaller value of the Seebeck coefficient than the undoped one, as doping introduces additional charge carriers in a material, which reduces the Seebeck effect


  • They optimized the crystal structure using third order Birch–Murnaghan Equation of State.This tells how the crystal’s total energy changes when its volume is slightly stretched or compressed — used to find the most stable structure. It depends on bulk modulus, its derivative, Pressure and Volume ratio.


  • The magnetic susceptibility of YFexMn1-xO3 decreases with increasing temperature. This is because, as with the rise of temperature, the magnetic domains become increasingly disordered, which reduces the net magnetization. This pattern follows the Curie-Weiss law of magnetization.


  • Pure YMnO₃: mostly Mn 3d and O 2p orbitals dominate near the Fermi level. 

  • With Fe doping: Fe 3d orbitals appear and mix with Mn 3d states. This mixing shifts energy levels → smaller band gap and stronger magnetism. Increasing Fe adds asymmetry between spin-up and spin-down channels → ferromagnetic tendency.


Measuring Depth in ion beam radiotherapy:

In medical imaging or radiation physics, a phantom is an artificial object (a model) that mimics the physical or radiological properties of real biological tissue — like human organs, bone, or soft tissue.

A typical ion-beam radiograph gives only a 2D projection and you don’t know the depth of changes (i.e., how far into the beam the changed tissue is).

 The team developed a method to scan through different “depths” virtually in the image and choose the one where the change looks sharpest. They propose a “2.5D” method to retrieve some depth information.


Water-equivalent thickness WET was calculated. It  tells how much a material (like tissue) slows down an ion beam, measured as if it were a certain thickness of water. Denser or thicker tissue → higher WET. If the patient (or the phantom) changes like an air cavity appears, or tissue swells — the WET values change at those pixels.


Tenengrad focus‐measure method (image sharpness metric): This method measures  a focus/sharpness metric based on image gradients which was computed using Sobel operators.

M is gradient magnitude at each pixel. 

S is a sobel operator: simple image processing filter used to detect edges — places in an image where brightness (intensity) changes quickly. It calculates gradients — how steeply the pixel brightness changes in the x and y directions. 


Tenengrad score is computed by calculating the average gradient magnitude over the entire image.Tenengrad measures overall sharpness of the image. it shows which depth inside the phantom the reconstructed image is sharpest.


Source: https://iopscience.iop.org/article/10.1088/1361-6560/ae02de#pmbae02des5


Exocomet Transit and Kepler light curve


  • The Kepler light curve is basically a graph of a star’s brightness over time measured by the Kepler space telescope.

  • Below equation is the light curve of an exocomet transit, describing how the star’s brightness changes over time due to the comet passing in front of it.

  • K → depth factor of the transit (how strong the dimming is)

  • β → rate of exponential change (how fast the brightness decreases or recovers)

  • After t1 brightness slowly returns to normal as the comet tail passes.


  • They used the Adam optimization algorithm to minimize the cross-entropy error function for the classification of the light curves and the mean absolute error function for the position of the transit.

  • Cross-entropy is a way to measure how different two probability distributions are. Adam (Adaptive Moment Estimation) is an improved version of regular gradient descent that helps the model learn faster.


https://arxiv.org/html/2510.14687v1


Deuterated water found on saturn moons

D/H (Deuterium to Hydrogen atoms)ratio of ice on saturn moons is 1.5 times than Vienna Standard Mean Ocean Water . 4.14 μm O-D absorption line was detected.

The reflectance spectrum radiative transfer model was used here. It tells us what planetary or moon surface is made of and how light interacts with it.


Basic radiative transfer equation:

I λ intensity of light at wavelength 

s  path through the material

αλ absorption coefficient

jλ emission or scattering source term


In planetary science, the Hapke model is widely used for bidirectional reflectance of a particulate surface.

B(g) = opposition effect function (brightening at small phase angles)

P(g) = particle phase function (angular scattering)

H(μ) = multiple scattering function



Source: AI chat GPT and https://arxiv.org/html/2510.14859v1#S5


Use of Piecewise linear transformation for filter in telescope

Each instrument has its own set of filters (wavelength bands) that measure light in slightly different ways. For example:JWST, Roman, the Euclid, the Hubble Telescope.

The libraries researchers used include:

  • CALSPEC (HST calibration stars)
  • IRTF and X-Shooter Spectral Libraries
  • E-IRTF (extended version for cooler stars)

Each library covers different temperature, metallicity (chemical composition), and luminosity classes — together they give a wide coverage of the HR diagram.


Synthetic magnitude is calculated as

F(λ): star’s flux (how much light it emits per wavelength).

T(λ): filter transmission function, show how transparent the filter is at each wavelength.


Continuous Piecewise linear transformation function is calculated as

It is used for fitting or converting magnitudes between different near-infrared (NIR) filters — such as those from JWST, Roman, and Euclid telescopes

Researchers-

  • Collected star spectra from multiple libraries
  • Simulated how each star looks through each telescope’s filters
  • Built mathematical relationships color–magnitude equations
  • Used regression to fit coefficients and calculated error
  • Checked across star types (HR diagram)
  • Applied to TRGB method (red giants branch) measures distance


https://iopscience.iop.org/article/10.3847/1538-3881/adfddb#ajadfddbs1